Komatsu — 4.7.4.a LUBRICATING THE DRIVE SHAFTS

MAINTENANCE PLAN 4.7.4 MAINTENANCE EVERY 100 HOURS OF OPERATION These maintenance operations should be carried out together with those to be performed every 50 HOURS. 4.7.4.a LUBRICATING THE DRIVE SHAFTS The propeller shafts must be lubricated after thoroughly cleaning the grease nipples, by applying the greasing pump filled with the prescribed grease. (See «4.3 FUEL, COOLANT AND LUBRICANTS»). Once the lubrication procedure has been carried out, make sure that all the points have been lubricated and re- move the used grease that may have spread out of the joints. a b c d e a. 2 points b. 1 point c. 1 point d. 2 points e. 1 point RKA02320 204