MAINTENANCE PLAN PARTS TO BE LUBRICATED ) 4.7.6.b LUBRICATING THE BOOM INNER HOSES, ROLLERS AND GUARD 207 No. Part Operation 1 Stabilizer cylinders – base side 2 points 2 Tilting cylinder - base side 1 point 3 Compensating cylinder - base side 1 point 4 Boom inner hoses See «4.7.6.b» ATTENTION ATTENTION • Before lubricating the guard, carefully remove any contam- inated grease. RKA02330 Carry out the lubrication procedure with completely retracted boom, after removing the rear cover of the main boom section. Use only the prescribed grease (see «4.3 FUEL, COOLANT AND LUBRICANTS»), and apply it to the guard with a brush.