MAINTENANCE PLAN 4.7.6.e CLEANING THE OUTSIDE OF THE RADIATOR AND OF THE HEAT EXCHANGER are carefully dried. IMPORTANT Avoid using products that contain oily components, even if in small quantities, since they facilitate the sticking of dust, which negatively affects the heat exchange process. Clean the outside of the radiator or of the heat exchanger whenever they are dirty with oil, or greasy or oily substances. If the machine is used in dusty places, clean the radiator and the heat exchanger more frequently, in or- der to prevent the fins from clogging.
4.7.6.f CHECKING THE ALTERNATOR-FAN BELT 2 RKAA1770 210 DANGER • If compressed air, steam or water are directed against a person, they may cause injuries. Always wear a face shield, a dust mask and safety shoes. The radiator can be reached after opening the engine hood (see «3.5.1 ENGINE HOOD»). The cleaning operations must be car- ried out using a compressed air jet, if necessary with a low pres- sure water or steam washing cycle; the specific detergents available on the market can be used, provided that the instruc- tions given on their package are followed and the washed parts RKAA1750 DANGER DANGER • Carry out these checking and maintenance operations only with cold engine.
The belt (1) can be reached after opening the engine hood (see «3.5.1 ENGINE HOOD») and after removing the fan guard (2). This check is visual, must be carried out with cold engine and consists in inspecting the belt for cuts, fraying, cracks. If any of these defects can be observed, have the belt changed by a Komatsu Utility Dealer. 1 RKAA1760 DANGER