Komatsu — 4.7.8.i CHECKING AND TIGHTENING THE BOOM CHAINS (Only for the 3-section boom version)

MAINTENANCE PLAN BOOM RETRACTION CHAIN 1 - Set the boom in horizontal position and check that the angle indicated on the goniometer (1) is 0°. 1 RKAA1630 2 - Remove the screws (2) and the grease nipple (3); then re- move the rear casing (4) and the upper guards (5) of the chains (6). 2 4 3 RKAA1611 5 6 RKAA1640 3- Verify that the distance “ B ” is more than 0mm, that is, that the end boom section (7) doesn’t rest against the intermediate section (8) when the latter makes contact with the main boom section (9) (A= 0mm). 8 A B A B 9 7 RKAA1650 222