PRECAUTIONS TO BE TAKEN DURING WORK 2.4.9.2 UNLOADING THE MATERIAL When placing loads in a high position, keep in mind that your visual perception is altered because of the distance. In this case, appoint an assistant who will signal what manoeuvres must be carried out, using the specif- ic signs agreed for handlers. The signals must be given by one person only. The operator must make sure that he is always able to see the assistant. The operator must look only at the assistant and not at the load, whose movements shall in turn be fol- lowed only by the assistant. 1 3 4 5 6 2 7 8 9 10 11 12 RKA01710 1 - START: both arms are extended horizontally with the palms facing forward. 2 - STOP:
the right arm points upward with the palm facing forward. 4 - RAISE: the right arm points upward with the palm facing forward and the hand slowly makes a circle. 3 - END: both hands are clasped at chest height. 5 - LOWER: the right arm points downward with the palm facing forward and the hand slowly makes a circle. 6 - HORIZONTAL DISTANCE: the hands indicates the relevant distance. 7 - MOVE FORWARD: both arms are bent with the palms facing upward, and the forearms make slow move- ments toward the body several times. 8 - MOVE BACKWARD: both arms are bent with the palms facing downward, and the forearms make slow movements away from the body several times. 9 - DANGER (EMERGENCY STOP):
both arms point upward with the palms facing forward. 10 - RIGHT: the right arm is extended more or less horizontally with the palm facing downward and slowly makes small movements to the right. 11 - LEFT: the left arm is extended more or less horizontally with the palm facing downward and slowly makes small movements to the left. 12 - VERTICAL DISTANCE: the hands indicate the relevant distance. 48 ATTENTION