Komatsu — 2.4.14 WORKING ON LOOSE GROUND

PRECAUTIONS TO BE TAKEN DURING WORK 2.4.13 PREVENTING DAMAGE CAUSED BY THE WORK EQUIPMENT When working in tunnels, galleries, under electric cables or other ducts (air, telephone lines) and wherever the height is limited, proceed with the greatest care to prevent the bucket or the forks from causing any damage. 2.4.14 WORKING ON LOOSE GROUND 51 • Avoid operating the machine too close to the edge of cliffs, overhangs and deep ditches. These areas may collapse, making the machine fall down or tip over and this could result in serious injury or even death. Remember that after heavy rain or earthquakes these danger- ous conditions usually get worse.

• Indicatively, the minimum safety distances to be kept from the edges of ditches, slopes, excavations, or sites when travelling and wishing to ensure the stability of the machine, are the fol- lowing: a - with compact ground: distance (X) equal to the depth of the ditch (fig. A); b - with not compacted ground, subject to landslides: dis- tance (X) twice the depth of the ditch (fig. B).   A NOTE • The safety distance must be measured at the upper edge of the ditch. • If it isn’t possible to respect the safety distance, it will be necessary to make a counterscarp on the ditch or the exca- vation. X X RKA02090 B 2X X RKA02100 B RKA02100