PRECAUTIONS TO BE TAKEN DURING WORK 2.4.15 PARKING THE MACHINE Park the machine on firm and level ground. If this is not possible and it is necessary to park on a slope, po- sition the machine with the equipment directed downwards and carry out the following operations: 1 - Select the four-wheel steering mode and steer completely to the right or to the left, choosing the direction in which there are fewer obstacles. 2 - Stop the machine, applying the parking brake. 3 - Lower the equipment to the ground. 4 - Stop the engine. 5 - Position wedges or safety blocks under the front and rear wheels. When leaving the machine, remove the ignition key and lock the door.
If it is necessary to park on public roads, signal the presence of the machine according to the local regulations in force (signal- ling fires, fences, roadworks ahead signs, alternated direction and direction signs, etc.). RKA02420 RKA02040 52