PRECAUTIONS TO BE TAKEN DURING MAINTENANCE 2.8 PRECAUTIONS TO BE TAKEN DURING MAINTENANCE 2.8.1 WARNING PLATES Before starting any maintenance operation, position the ma- chine on a firm and level surface, rest the equipment onto the ground, engage the safety locks of the equipment and the con- trols and stop the engine. If another person starts the engine and operates the control le- vers while the operator is servicing the machine, this may result in serious injury or even death.
DO NOT START ENGINE To avoid these risks, always attach warning signs to the steer- ing wheel, the control levers and the ignition key before per- forming any maintenance operation; if necessary, attach additional warning tags also around the machine and in particu- lar on the cab handles. RKA00340 2.8.2 TOOLS Use only the tools supplied together with the machine and high- quality tools suitable for the tasks to be performed. Do not use worn, damaged, low-quality tools or tools that are not suitable for the tasks to be performed, in order to avoid any personal injury. After use, always store the tools in the apposite compartment (1) under the seat.
RKAA0840 1 2.8.3 PERSONNEL Only authorized and duly trained personnel can service and repair the machine; additional precautions must be taken when grinding, welding and using a sledge hammer or heavy hammers. When assembling the equipment or cylinder connection pins, use wooden, plastic or in any case not excessively hard tools to check the centering of the holes. Do not use your fingers, since you run the risk of cutting them. 56