Komatsu — 3.2.5 MACHINE CONTROLS

INSTRUMENTS AND CONTROLS a (F) a (F) a (F) c c (N) (N) (N) d d b (R) b (R) b (R) RKAA0800 a - When shifted FORWARD (F) and rotated on its axis , the forward movement of the machine is enable. b - When shifted BACKWARD (R) and rotated on its axis , the reverse movement of the machine is enable. NOTE If the machine travels in 1 st forward (F) gear at a speed exceeding 4 km/h and a reversal is carried out (1 st reverse gear (R)), the gears automatically shift to NEUTRAL (N). IMPORTANT Damage to the transmission may occur if the machine is allowed to coast with the engine off. Damage to the transmission may also occur if the machine travel direction is reversed at an excessive speed.

Do not allow the machine to coast. Reverse the machine travel direction only with the machine in 1 st gear and moving at less than 4 km/h. The lever in position (N), rotated on its horizontal axis selects: c - When rotated FORWARD, the upshift of the 5 gears available. d - When rotated BACKWARD, the downshift of the 3 gears available. 85