Komatsu — 3.2.5 MACHINE CONTROLS

INSTRUMENTS AND CONTROLS All the functions are indicated by leds that come on or take on dif- ferent colours: RKAA0791 Example: If the 2 nd forward gear (F) is engaged, the led (2) is green. If the 2 nd reverse gear (R) is engaged, the led (2) is yellow. If the 2 nd gear is selected with machine in neutral (N), the led (2) is red. The other rules governing the use of the gearshift-reverse lever unit are the following: 1 - Every time the engine is stopped, the gears automatically shift to neutral (N) and any gear engaged is released.

When the engine is restarted, the gearshift passes to the safety position (LED N RED); to start moving, shift the lever to the NEUTRAL position (N), select the travel direction and engage a gear (the 2 nd gear is automatically engaged). RKAA0811 86 LED CONDITION N Comes on when the machine is in NEUTRAL T Used only with a diagnostic function, comes on only in case of failure 1 - 5 Indicate what gear is engaged (N°) and the direction according to their colours. RED: with machine in NEUTRAL GREEN: with machine in FORWARD gear YELLOW:

with machine in REVERSE gear NOTE If the enable of movement is selected but the gear lever is not shifted, the corresponding led flashes passing from GREEN to YELLOW and vice versa. 6 Not used. 7 Used only for the SEMI-AUTOMATIC gearshift. 8 No indication during the use of the machine.