Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — HSS MOTOR

SEN00285-01 10 Structure, function and maintenance standard Brake valve operation 1. Counterbalance valve, check valve q The brake valve consists of check valve (12), counterbalance valve (10), and safety valve (11), and forms the circuit as shown below. Function q When the steering is operated on a downhill slopes, the weight on the machine produces a force in the downward direction which makes the machine try to turn faster than the speed of the HSS motor. q The function and the operation of each compo- nent is as given below. q Because of this, if the engine is run at low speed and the steering is operated, the HSS motor will overrun, and this will create an extremely dangerous condition.

q To prevent this, this valve is installed to carry out the steering in accordance with the engine speed [pump discharge amount]. q When the steering lever is operated, the pres- surized oil from the control valve is supplied to port (PA). It pushes open check valve (12a), and flows from HSS motor inlet port (MA) to HSS motor outlet port (MB). Operation when pressurized oil is supplied q However, the outlet port side of the HSS motor is closed by check valve (12b) and spool (10), so the pressure at the side where the oil is being supplied rises. 32 D65EX, PX, WX-15E0