Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — HSS MOTOR

10 Structure, function and maintenance standard SEN00285-01 Action of brakes when operating steering on downhill slopes q The pressurized oil at the side where the oil is being supplied flows from orifice (E1) of spool (10) into chamber (S1). And when the pressure in chamber (S1) becomes greater than the spool switching pressure, spool (10) is pushed to the right. q When the steering is operated on a downhill slopes, if the machine attempts to run away, the HSS motor will rotate under no load, and the oil pressure at the inlet port of the HSS motor will drop. This drop in the pressure will pass through orifice (E1), so the pressure in chamber (S1) will also drop.

q In this way, port (MB) and port (PB) are con- nected, so the outlet port side of the HSS motor is opened and the HSS motor starts to turn. q If the pressure in chamber (S1) drops below the spool switching pressure, spool (10) is pushed to the left by spring (9), and outlet port (MB) is throttled. q As a result, the pressure at the outlet port rises, and this creates a resistance to the rota- tion of the HSS motor which prevents the motor from overrunning. q In other words, the spool moves to a position where it balances the pressure at outlet port (MB) with the force resulting from the weight of the machine and the pressure at the inlet port.

In this way, it throttles the outlet port circuit and controls the motor to a speed that matches the amount of oil discharged from the pump. D65EX, PX, WX-15E0 33