SEN00286-01 10 Structure, function and maintenance standard When load pressure (P2) is lower than output pressure (PR) of the self pressure reducing valve q Spring (3) and pressure (PR) [0 MPa {0kg/cm 2 } at the time of engine stop] push valve (2) in the direction to close the circuit between ports (P1) and (P2). When the hydraulic oil enters port (P1), the expression [pressure (P1) C Spring (3) force + (area (d) Ч pressure (PR))] holds, and the self pressure reducing valve will adjust the openings of ports (P1) and (P2) so that pressure (P1) can be maintained higher than pressure (PR).
q When pressure (PR) rises above set pressure, poppet (5) opens and hydraulic oil flows through the route, from port (PR), through hole (a) in spool (8), through poppet (5) opening to tank port (T). q Therefore, differential pressure occurs around hole (a) in spool (8) and spool (8) moves from port (P1) in the direction to close opening (PR). Then pressure (P1) is reduced and adjusted to a certain pressure [set pressure] with the opening and is supplied as pressure (PR). 40 D65EX, PX, WX-15E0