SEN00585-00 30 Testing and adjusting a Rocker arm assembly 1) Tighten the mounting bolt after checking that the ball portion of adjustment screw is well seated in the push rod socket. 3 Bolts: 64.7 ± 4.9 Nm {6.6 ± 0.5 kgm} 2) After installing the rocker arm assembly, adjust the valve clearance referring to “Adjusting valve clearance”. a Fuel high-pressure piping When assembling the pipe, tighten the mount- ing nuts in the injector side first, then tighten nuts in the common rail side. 3 Nuts: 37.3 ± 4 Nm {3.8 ± 0.4 kgm} a Tightening torque of the injector harness termi- nal nut 3 Nut: 1.25 ± 0.25 Nm {0.13 ± 0.03 kgm} a Tightening torque of the head cover mounting nuts 3 Nut:
11.8 ± 1.96 Nm {1.2 ± 0.2 kgm} 18 D65EX, PX, WX-15E0