SEN00585-00 30 Testing and adjusting 4. Measuring transmission main relief pres- sure 1) Remove oil pressure pickup plug (4) and attach nipple K3 , and connect oil pressure gauge [1] of hydraulic tester K1 . a Use an oil pressure gauge of 5.9 MPa {60 kg/cm 2 }. 5. Measuring clutch pressure q Remove the operator seat assembly and measure the clutch pressure from the top of the floor frame. a List of oil pressure measuring points and gauges to be used. 2) Run the engine and set the PCCS lever in the full neutral position. 3) Measure the oil pressure while the engine is running at low idle and high idle.
4) After finishing measurement, remove the measuring instrument and reinstall the removed parts. 36 D65EX, PX, WX-15E0 No. Measuring point Gauge (MPa {kg/cm2}) Trans 5 press mission forward clutch ure 5.9 {60} Trans 6 press mission reverse clutch ure 5.9 {60} Trans 7 press mission 1st clutch ure 5.9 {60} Trans 8 press mission 2nd clutch ure 5.9 {60} Trans 9 press mission 3rd clutch ure 5.9 {60}