Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — SIMPLE METHOD TO TEST BRAKE PERFORMANCE

30 Testing and adjusting SEN00585-00 Simple method to test brake performance 1 a Implement simple method to test brake perfor- mance under the following condition. q Power train oil temperature: Within operating range 1. Set the blade and ripper (if equipped) in the travel posture on a level place. 2. Run the engine and set the parking brake lever in free position. 3. While the engine is running at low idle and the brake pedal is depressed securely, set PCCS lever in the forward and 2nd gear speed posi- tion. k If this test is carried out in the 1st gear position, the brake is overloaded. Therefore, be sure to carry it out in 2nd gear speed. a Set the steering unit in neutral. 4.

Press the decelerator pedal and set the fuel control dial in the high idle position. 5. Return the decelerator pedal slowly and check that the machine does not start when the engine speed reaches the high idle level. k Since the torque converter is stalled, press the brake pedal securely and keep your right foot on the decelerator pedal for safety until the work is fin- ished. D65EX, PX, WX-15E0 39