Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — ADJUSTING BRAKE PEDAL

SEN00585-00 30 Testing and adjusting Adjusting brake pedal 1 a Tighten the locknuts of the rods and cables securely, and bend the cotter pins securely. 1. Adjust the stroke ( a ) of brake pedal (1) with the installation dimension ( b ) of damper (2). q Pedal stroke ( a ): 77.5 mm q Installation dimension ( b ) of damper: 25 mm 2. Adjust installation dimension ( c ) of rod (3) on the valve side, then connect to brake valve lever (4). q Rod installation dimension ( c ) : 773 mm a Fully screw in joint (5) to the valve side. 3. Adjust installation dimension ( d ) of rod (6) on the pedal side, then connect to brake pedal (1). q Rod installation dimension ( d ) : 175 mm 4.

Lightly push rod (3) on the valve side toward the rear of the machine, and turn only joint (7) to connect rods (3) and (6). a Push rod (3) with a force of about 9.8 – 19.6 N {1 – 2 kg}. 3 Joint: 34.3 – 58.8 Nm {3.5 – 6.0 kgm} 40 D65EX, PX, WX-15E0