Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — ADJUSTING BRAKE PEDAL

30 Testing and adjusting SEN00585-00 5. With brake pedal (1) released, adjust its play with dimension ( e ) between the pins of rod assembly (8). q Play of pedal: 3 – 8 mm (center of pedal) q Dimension ( e ) between pins of rod assem- bly: 978 mm a Adjust by turning joints (5) and (7) in the same direction at the same time. 6. With brake pedal (1) released, check that brake pedal (1) is in contact with damper (2). 7. Checking brake oil pressure 8. After adjusting the pedal, adjust the zero point of the brake potentiometer (Adjustment mode: 0005). a For the operating method, see “Special functions of monitor panel (EMMS)”.

D65EX, PX, WX-15E0 41 Oil pressure MPa {kg/cm2} Remarks Brake released Min. 2.55 {Min. 26} Engine at full throttle Brake applied 0