Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — EMERGENCY ESCAPE METHOD WHEN POWER TRAIN HAS TROUBLE

SEN00585-00 30 Testing and adjusting 4) Disconnect neutral safety relay ( NSF ) and connect pins [3] and [5] of the connector on the wiring harness side. a When the connector (PL2) is discon- nected, a model selection error is trig- gered and the neutral safety relay will not be actuated. Above procedure is implemented to avoid this condition. 5) Run the engine and set the parking brake lever in free position. 6) Operate switch assembly [1] and move the machine to a safe place. a The electrical circuit of the gear speed switches is configured so that the switch on the lower gear speed is operated first. k If the engine is started by this method, the neutral safety function does not work.

Accordingly, before starting the engine, set the parking brake lever in lock position and set the PCCS lever in full neutral posi- tion. k Take care that the L.H. and R.H. steering directions are opposite when reverse. k Start the engine by this method only in an emergency. If the engine does not start in other cases, be sure to carry out troubleshooting and repair the trouble. 44 D65EX, PX, WX-15E0