SEN00585-00 30 Testing and adjusting Adjusting clearance of idler 1 a If the lateral guide plates of the idler have worn excessively and the idler ran out slants, adjust the clearance of the idler according to the fol- lowing procedure. Adjustment procedure 1) Drive the machine 1 – 2 m on flat ground, then measure clearance ( a ) between the track frame and guide plate (4 places; left, right, inner and outer sides). 2) If clearance ( a ) is larger than 4 mm, loosen bolt (1) and reduce shim (2). q Standard clearance ( a ) on each side: 0.5 – 1.0 mm q Shim thickness: 1.0 mm 46 D65EX, PX, WX-15E0