Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — TESTING AND ADJUSTING WORK EQUIPMENT AND HSS OIL PRESSURE

SEN00585-00 30 Testing and adjusting Testing and adjusting work equipment and HSS oil pressure 1 1. Measuring unload pressure 1) Remove oil pressure pickup plug (2) and install nipple M2 to connect oil pressure gauge [1] of hydraulic tester M1 . a Use an oil pressure gauge of 39.2 MPa {400 kg/cm 2 }. a Testing and adjusting instruments for work equipment and HSS oil pressure k Stop the machine on a level place, lower the work equipment to the ground, and set the parking brake lever and work equip- ment lock lever in the lock position. a Measure the work equipment and HSS oil pressure under the following condition. q Hydraulic oil temperature:

Within operat- ing range a The centralized work equipment and HSS oil pressure pickup ports are installed inside inspection cover (1) on the right outside of the operator's cab. 2) Running the engine at high idle, measure the oil pressure with the work equipment lever and PCCS lever set in neutral posi- tion. a Oil pressure measuring points (2): Main pump pressure (3): Load sensing pressure (LS pressure) 3) After finishing measurement, remove the measuring instrument and reinstall the removed parts. 48 D65EX, PX, WX-15E0 Symbol Part No. Part name M 1 795-101-5002 Hydraulic tester 790-261-1204 Digital hydraulic tester 2 799-101-5220 Nipple (10 x 1.25 mm) 07002-11023 O-ring