Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — TESTING AND ADJUSTING WORK EQUIPMENT AND HSS OIL PRESSURE

30 Testing and adjusting SEN00585-00 2. Measuring work equipment and HSS oil pressure Connect oil pressure gauges [1] of hydraulic tester M1 to pump oil pressure pickup port (2) and load sensing pressure pickup port (3). a Use the following oil pressure gauges Work equipment oil pressure: 39.2 MPa {400 kg/cm 2 } HSS oil pressure: 58.8 MPa {600 kg/cm 2 } q HSS oil pressure 1] Run the engine, set the parking brake lever in the free position, and depress the brake pedal. k Since the steering circuit will be stalled, keep pressing the brake pedal securely and keep your right foot on the decelerator pedal for safety until the work is finished.

2] Run the engine at high idle and steer to the right or left with the PCCS lever. When the steering circuit is relieved, measure the oil pressure. 3] After finishing measurement, remove the measuring instrument and return the removed parts. q Work equipment oil pressure 1] Run the engine and set the work equipment lock lever in the free posi- tion. 2] Run the engine at high idle and oper- ate the blade lever and ripper lever. When each cylinder is relieved at the stroke end, measure the oil pressure. a Block the return hose of the blade lift cylinder. 3] After finishing measurement, remove the measuring instrument and rein- stall the removed parts. D65EX, PX, WX-15E0 49