Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — TESTING AND ADJUSTING WORK EQUIPMENT AND HSS OIL PRESSURE

SEN00585-00 30 Testing and adjusting 3. Adjusting 1) LS pressure (Load sensing pressure) of work equipment Loosen locknut (4) of work equipment LS valve (3) and rotate adjustment screw (5) to adjust the LS pressure. a If the adjustment screw is 2) LS pressure (Load sensing pressure) of HSS Loosen locknut (7) of LS valve (6) of HSS and rotate adjustment screw (8) to adjust the LS pressure. a If the adjustment screw is q rotated to the right, the oil pres- sure is heightened. q rotated to the right, the oil pres- sure is heightened. q rotated to the left, the oil pres- sure is lowered.

a If the adjustment screw is rotated 1 turn, the pressure is heightened or lowered by 15.1 MPa {154 kg/cm 2 } q rotated to the left, the oil pres- sure is lowered. a If the adjustment screw is rotated 1 turn, the pressure is heightened or lowered by 17.6 MPa {179 kg/cm 2 } 3 Locknut: 29.4 – 39.2 Nm {3 – 4 kgm} 3 Locknut: 68.6 – 78.5 Nm {7 – 8 kgm} q After adjusting, check the relief pres- sure and LS pressure of work equip- ment again. q After adjusting, check the relief pres- sure and LS pressure of work equip- ment again. 50 D65EX, PX, WX-15E0