Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — ADJUSTING STRAIGHT TILTDOZER

30 Testing and adjusting SEN00585-00 3. Adjusting center brace a Adjust the center brace tension according to the following procedure. 1) Adjust clearance ( b ) of ball joint (7) with shim (8). q Clearance ( b ): 0.2 – 0.5 mm 2) Loosen bolt (9). 3) Operate the blade control lever to float the blade. k After operating the blade control lever, lock it with the safety lever securely. 4) Insert a bar in the hole of center brace (10) and turn it in the tensing direction. a Tension adjustment torque of center brace (10) 3 Center brace:

24.5 – 49 Nm {2.5 – 5 kgm} 5) Installation dimension of center brace (10) Standard dimension ( C ) a Adjust center brace so that clear- ances ( e ) between the track and frame on both sides will be the same. D65EX, PX, WX-15E0 63 PX EX C (mm) 991.5 995