30 Testing and adjusting SEN00587-00 3. Engine controller 1) Open engine hood left cover (1) and remove side covers (2), (3). k In order to prevent malfunction and mis- taken system error warning, be sure to completely remove foreign object (b) such as sand, dust, water, etc., from inside of controller side connector (a) with air blow etc., before connecting to harness connec- tor. 2) Insert or connect T-adapters in or to con- nectors CE01, CE02 and CE03 of engine controller (4). a Since the connectors (CE01 and CE02) are secured with screws, loosen those screws before discon- necting. a When connecting the connectors again, tighten their screws with the specified torque. 3 Screw:
3 ± 1 Nm {0.3 ± 0.1 kgm} D65EX, PX, WX-15E0 5