Komatsu D65EX-15E0, D65PX-15E0, D65WX-15E0 — FAILURE CODE [DLT3KB] TRANSMISSION OUTPUT SPEED SENSOR: SHORT CIRCUTI

40 Troubleshooting SEN00592-00 Failure code [DLT3KB] Transmission output speed sensor: Short circuit 1 Circuit diagram related to transmission output speed sensor D65EX, PX, WX-15E0 7 Action code Failure co de Symptom of failure Transmission output speed sensor: Short circuit (Steering and transmission controller system) E01 DLT3KB Failure conte nt • Signal from transmission output sensor stays in OFF(OPEN) even though the machine is traveling. Controller's action • Assumes that transmission output speed is 0 rpm. Symptoms th appears on machin at • Transmission speed cannot be monitored. • Traction force cannot be calculated.

e • Automatic shift-down does not function properly General information • Transmission output speed can be checked in monitoring mode. (Code 31400: Transmission speed) • Duplication of failure code: Start engine and travel machine actually.

Possible causes and t standard valu when norm Cause Defective installation of 1 transmission output speed sensor Defective transmission 2 output speed sensor (internal short circuit) he es al Defective harness grounding 3 (Contact with ground circuit) Defective steering and 4 transmission controller Standard value when normal and remarks for troubleshooting Defective installation of transmission output speed sensor Make adjustment according to Testing and adjusting “Adjusting transmission speed sensor”. Defective transmission output speed sensor (internal short circuit) aPrepare with starting switch OFF and diagnose with starting switch still OFF.

TM1 (male) Resistance Between (1) – (2) 400 – 1,000 z Between (1) – chassis ground Min. 1 Mz Defective harness grounding (Contact with ground circuit) aPrepare with starting switch OFF and diagnose with starting switch still OFF. Between ground and wiring harness between ST2 (female) (30) – TM1 (female) (1) Resis- tance Min. 1 Mz Defective steering and transmission controller aPrepare with starting switch OFF and diagnose with starting switch still OFF. ST2 (female) Resistance Between (30) – (29) 400 – 1,000 z Between (30) – chassis ground Min. 1 Mz