40 Troubleshooting SEN00592-00 Failure code [DW5AKA] Pitch control solenoid: Disconnection 1 Circuit diagram related to pitch control solenoid D65EX, PX, WX-15E0 9 Action code Failure code Symptom of failure Pitch control solenoid: Disconnection (Steering and transmission controller system) E02 DW5AKA Failure conten t • Any current does not flow when power is output to the pitch control solenoid circuit. Controller's action • Flashes warning lamp and turns on alarm buzzer. • Stops output to pitch control solenoid circuit. Symptoms tha appears on machine t • Pitch control is not available. General information • Output state (ON/OFF) to pitch control solenoid can be checked in monitoring mode.
(Code 70304: Work equipment-related controller output signal) • Duplication of failure code: Turn starting switch ON and operate pitch control switch. Possible causes and th standard value when normal Cause Defective pitch control solenoid 1 (internal disconnection) e Disconnection in wiring harness s 2 (Disconnection or defective contact of connectors) Defective steering and 3 transmission controller Standard value when normal and remarks for troubleshooting aPrepare with starting switch OFF and diagnose with starting switch still OFF. 52 (male) Resistance Between (1) – (2) 20 – 30 z aPrepare with starting switch OFF and diagnose with starting switch still OFF.
Wiring harness between ST3 (female) (17) – 52 (female) (1) Resis- tance Max. 1 z Wiring harness between ST3 (female) (35) – 2 (female) (2) Resis- tance Max. 1 z aPrepare with starting switch OFF and diagnose with starting switch still OFF. ST3 (female) Resistance Between (17) – (3) 20 – 30 z