SEN00945-00 50 Disassembly and assembly 83. Remove 2 mounting bolts (94) of the injector assembly. Installation q Cylinder head assembly a Check that there is no dirt and foreign matter on the cylinder head mounting surface and in the cylinders. 84. Using tool A3 , remove injector assembly (97). a Take care that dirt and foreign matter will not enter the mounting part of the fuel injector assembly. 1. Set cylinder head gasket (103) to the cylinder block. a Match the holes of the cylinder head gas- ket to the holes of the block. 85. Remove push rod (98). 86. Remove spacer (99). 87. Work on the other cylinders similarly. 88. Remove rocker housing assembly (100). 2.
Sling cylinder head assembly (102) and set it to the block. a Check that the collet is fitted to the groove of each valve stem by lightly hitting the valve stem with a plastic hammer. a Check that cylinder head gasket (103) is matched to the holes of the block. 89. Remove the 26 bolts and lift off cylinder head assembly (102). 4 Cylinder head assembly: 85 kg 90. Remove cylinder head gasket (103). 12 D65EX, PX, WX-15E0