SEN00947-00 50 Disassembly and assembly 7. No. 1 discs, plates, and springs 1) Remove 5 springs (32). 2) Remove 6 plates (33) and 5 discs (34). 12. No. 2 housing and No. 2 carrier assembly 1) Push up the output shaft lightly from underside. 2) Remove snap ring (42). 3) Using eyebolts [5], remove No. 2 housing and No. 2 carrier assembly (43). 8. No. 1 housing assembly 1) Using eyebolts [4], remove No. 1 housing assembly (35). 2) Remove No. 1 piston (36) from the housing. 13. Disassembly of No. 2 housing and No. 2 carrier assembly 1) Remove snap ring (44) and pull No. 2 car- rier assembly (45) out of No. 2 housing (46). 9. No. 2 piston Remove No. 2 piston (37). 10.
Guide pin Remove 5 guide pins (38). 11. No. 2 discs, plates, and springs 1) Remove 5 No. 2 clutch springs (39). 2) Remove 7 discs (40) and 6 plates (41). 22 D65EX, PX, WX-15E0