Operator Cab And Controls - Section 32 OM3242 Page 32-4 Throttle/Accelerator Pedal Throttle/accelerator pedal (4, Figure 32-1), and shown below, is a foot-operated pedal which allows the operator to control engine rpm depending on pedal depression. GRADE/SPEED RETARD CHART Grade/speed retard chart (8, Figure 32-1), and shown below, provides the recommended MAXI- MUM retarding limits at various truck speeds and grades with a fully loaded truck. It is used by the operator to request torque from the motors when in forward or reverse. In this mode, the propulsion system controller commands the correct engine speed for the power required. In NEUTRAL, this pedal controls engine speed directly.
This decal in the truck may differ from the decal below due to optional truck equipment such as: wheel motor drive train ratios, retarder grids, tire sizes, etc. Always refer to this decal in the operator's cab and follow these recommendations for truck operation. The operator must reference this chart before descending any grade with a loaded truck. Proper use of dynamic retarding will maintain a safe speed. Two speed lists are provided, one for continuous retarding, and the second for short term (approxi- mately three-minute) retarding. Both lists are matched to the truck at maximum Gross Vehicle Weight (GVW).
The two ratings are guidelines for proper usage of the retard function on downhill grades.