Operator Cab And Controls - Section 32 OM3242 Page 32-6 OVERHEAD PANEL AND DISPLAYS The items listed below are located on the overhead panel. Refer to Figure 32-1 for the location of each item. A brief description of each component is docu- mented below. Status/Warning Indicator Light Panel Panel (13, Figure 32-1) contains an array of indicator lights to provide the operator with important status messages concerning selected truck functions. Refer to Instrument Panel and Indicator Lights in this sec- tion for a detailed description of these indicators. Radio Speakers Radio speakers (9, Figure 32-1) for the AM/FM Radio / CD Player are located at the far left and right of the overhead panel.
Air Cleaner Vacuum Gauges Air cleaner vacuum gauges (14, Figure 32-1) provide a continuous reading of the maximum air cleaner restric- tion reached during operation. The air cleaner(s) must be serviced when the gauge(s) shows the maximum recommended restriction of 635 mm (25 in.) of H 2 O vacuum. Warning Alarm Buzzer Warning alarm buzzer (10, Figure 32-1) will sound when activated by any one of several truck functions. Refer to Instrument Panel and Indicator Lights in this section for a detailed description of functions and indicators that will activate this alarm. NOTE: After service, push the reset button on face of gauge to allow the gauge to return to zero.
Cab Radio This panel will normally contain AM/FM Radio / CD Player (11, Figure 32-1). Refer to Section 70 for a more complete description of the radio and its func- tions. Individual customers may use this area for other purposes, such as a two-way communications radio. Windshield Wipers Windshield wipers (15, Figure 32-1) are powered by an electric motor. Refer to Steering Wheel And Con- trols in this section for a location and description of the windshield wiper and washer controls. Warning Light Dimmer Control Warning light dimmer control (12, Figure 32-1) per- mits the operator to adjust the brightness of warning indicator lights (13).