PACCAR Inc. — Rear Axle Lubrication

REAR AXLE AND SUSPENSION WARNING Rear Axle Lubrication Rear Suspension U-Bolts, Grade 8 (lubricated*) Do not replace U-bolts and nuts with common U-bolts or standard nuts. These parts are critical to vehicle safety. If the wrong U-bolts or nuts are used, the axle could loosen or separate from the vehicle and cause a serious accident. Use only U-bolts and nuts of SAE Grade 8 specification or better. Failure to comply may result in death, personal injury, equipment or property damage. Check oil level with the vehicle parked on level ground and the fluid warm. The level should be even with the bottom of the filler hole. Load the vehicle to its normal gross weight before tightening U-bolts.

Loading the vehicle ensures proper adjustment of the U-bolt and spring assembly. 5 5-127 U-BOLT SIZE DIAMETER THREAD TORQUE** Nm Lb-Ft 3/4 333-408 245-300 7/8 598-734 440-540 1 925-1,060 680-780 1-1/8 1,470-1,660 1,080-1,220 1-1/4 1,890-2,120 1,390-1,560 1-1/2 3,130-3,860 2,300-2,840 *Chevron Zinc Lubricant or SAE 20/30 oil should be used on U-Bolt threads **Torque requirements apply to manufacturer proprietary suspensions. All other suspensions must refer and adhere to original manufacturers shop manual.