Komatsu — CHECK ENGINE CRANKCASE OIL LEVEL

MAINTENANCE 3 EVERY 10 HOURS SERVICE 3 CHECK RADIATOR COOLANT LEVEL Hot, scalding coolant can spray out if the radiator cap is removed suddenly. Relieve system pressure by slowly turning the cap to the first notch or lifting the safety lever (if equipped). Remove the cap only after the pressure is relieved. Use extreme caution when adding coolant to a hot radiator to avoid being burned. Wear gloves and goggles and keep face away from the filler neck. 1. Check the coolant level in radiator sight glass to make sure coolant is present. 2. Open the hood access door at the top front of the machine. 3. Remove radiator cap and check that the coolant level is visible.

If level is low, add coolant until it is visible in sight gauge. For details of the coolant to use, see “USE OF FUEL, COOLANT AND LUBRICANTS” on page 3-7. 4. After adding coolant, tighten the cap securely and close the access door. 3 CHECK ENGINE CRANKCASE OIL LEVEL Park the machine on level ground, stop the engine, lower all mounted equipment to the ground, apply the safety lock, apply the brake pedal lock, turn off the electrical system master switch. 1. With the engine stopped, open the left engine side door. D87E-2 D87P-2 3-23