Komatsu — CLEAN AIR CLEANER ELEMENTS

MAINTENANCE REMOVAL Never clean or replace the air cleaner filter element with the engine running. When using compressed air to clean the filter element, wear safety glasses or goggles to protect your eyes and limit the air pressure to less than 7 kg/cmІ (99 psi). 1. Stop the engine and lower all mounted equipment to the ground. Open the left engine side door. 2. Remove all dirt and contamination from the clamp and end cover of the air cleaner body. 3. Loosen the T bolt of the retainer clamp (13) and remove vacuator end cover (9). 4. Loosen the wing nut (6) and slide out the outer element (5) being careful not to dislodge dust from the dirty element onto the inner el- ement.

3-66 D87E-2 D87P-2