OPERATION 2. After completing work, fill the fuel tank through the filler port. For details of locking cap, see “LOCKING CAP” on page 2-29. For details of the fuel to use, see “USE OF FUEL, COOLANT AND LUBRICANTS” on page 3-7. 3. After adding fuel, tighten the cap securely. Remark Fuel capacity: . . . . . . . . . . . . . . . . . . . . . . . . 490 L (129 gal) 2 Check Engine Oil Level Park the machine on level ground, stop the engine, lower all mounted equipment to the ground, apply the safety lock, apply the brake pedal lock, turn off the electrical system master switch. 1. With the engine stopped, open the left engine side door. 2. Check the oil level.
For an accurate reading wait for the oil to drain into the crankcase pan. 3. Open hood access door. Remove the oil level gauge (1) and wipe it clean. Reinsert the gauge completely. 4. Remove the gauge and check the oil level. If the level is at or below the L mark, add oil through the filler opening (2) to bring the level up to the H mark on the gauge. For details of the oil to use, see “USE OF FUEL, COOLANT AND LUBRICANTS” on page 3-7. Remark Never run the engine if the level of the oil is at or below the L mark on the oil level gauge. 2-34 D87E-2 D87P-2