OPERATION 2 Check Oil Level in Drive Train, Add Oil 1. Open the rear access door. Unscrew the T handle of the oil level gauge, remove the gauge and wipe it clean. 2. Insert the gauge fully into the filler sleeve. Do not tighten. Remove gauge and check the lubricant level. If necessary, add oil through the filler to bring the level up the FULL mark on the gauge. Rein- stall and secure the gauge. For details of oil to use, see “USE OF FUEL, COOLANT AND LUBRICANTS” on page 3-7. 2 Check Brake Pedal Travel 1. Fully depress the brake pedal with 13.7 kgf (30 lbf), the back of the pedal arm should be 6 ± 0.5 mm (0.24 ± 0.02 in) ( A ) from the front face of the firewall. 2.
When the dimension differs from the required as above or the en- gagement of the brake lock becomes difficult, contact your distribu- tor. D87E-2 D87P-2