Komatsu — MOVING THE MACHINE

OPERATION MOVING THE MACHINE NOTE: This added page shows the differences for machines equipped with Single Lever Transmission/Steering Control. 5. Rotate (twist) the transmission/steering control lever to one of three rotary detent (mechanical) positions for transmission range gear se- lection. Counter-clockwise rotation to the 1st gear detent; Center position for the 2nd gear detent; and Clockwise rotation to the 3rd gear detent. # Gear selection applies to all transmission/steering lever drive positions. 6. On the face of the transmission/steering lever, press the HIGH button to engage direct drive for both tracks or the LOW button to select gear reduction for both tracks. 7.

Movement begins when the transmission/steering control lever is moved toward the desired travel direction. Their is a hydraulically actuated detent for forward and reverse, which is functional only when the engine is running and the safety lock lever is in the UNLOCK position. 8. Press and hold the LEFT or RIGHT button (on the face of the trans- mission/steering control lever) for a left or right power turn. D87E-2 D87P-2 2-53