OPERATION NOTE: This added page shows the differences for machines equipped with Single Lever Transmission/Steering Control. SHIFTING THE TRANSMISSION Center position of the transmission/steering lever is neutral. Move the safety lock lever to the UNLOCK position. This action sup- plies oil to the transmission/steering lever control valve making it oper- ational. Forward and Reverse Motion Push the transmission/steering lever forward to engage the forward clutch and obtain forward motion. Pull the transmission/steering lever backward to engage the reverse clutch and obtain reverse motion.
There is a hydraulically actuated detent for both forward and reverse, which is functional only when the engine is running and the safety lock lever is in the UNLOCK position. Range Gear Selection Rotate (twist) the transmission/steering control lever to one of three ro- tary detent (mechanical) positions for transmission range gear selection. Counter-clockwise rotation to the 1st gear detent; Center position for the 2nd gear detent; and Clockwise rotation to the 3rd gear detent. Gear selection applies to all transmission/steering lever drive positions.
The three transmission ranges and the two steering drive ranges (de- scribed below) give a total of six operating ranges in which the machine can operate. STEERING THE MACHINE Avoid turning the machine on a slope. The machine will tend to slip sideways. Particular care should be taken on soft dirt or clay. Never make a pivot turn at high speed. M ove the transmission/steering lever to the left to make a left turn or to the right to make a right turn. When the transmission/steering lever is moved all the way to the left or right, the steering clutch on that side is released and the steering brake on that side is applied, giving a pivot turn.
Moving the transmission/steering lever partially to one side gives partial pressure to the clutch and brake, giving a modulated turn. The transmission/steering lever is spring loaded to the center for straight motion. High or Low Steering Range and Power Turns The four (4) buttons on the transmission/steering lever control the two- speed steering clutches in the steering drive. Move the transmission/steering lever from neutral (center) to a drive position for steering range and power turn functions. Press and release the upper button to select the HIGH range. Direct drive is engaged to both tracks. Press and release the lower button to select the LOW range.
Gear reduction is engaged to both tracks. Depress and hold the left button for a power turn to the left. Gear reduction is engaged to the left track and direct drive to the right track. Depress and hold the right button for a power turn to the right. Gear reduction is engaged to the right track and direct drive to the left track. Releasing the left or right button returns the steering system to the range (HIGH or LOW) that had been last selected. 2-54 D87E-2 D87P-2