Overview New hydrostatic drive New hydrostatic drive The launch of the new Unimog implement carrier marks the world premiere of a new hydrostatic drive (code G34), which combines a modified hydrostatic drive major assembly con- cept with the cruise control operating and control concept. It replaces the previous hydrostatic drive system (code G33) used in the Unimog implement carrier. The combination of hydrostatic drive and manual transmission now allows on- the-fly switching while driving. Previously, it was necessary to stop briefly to change systems.
The new convenient Drive- Work mode is useful, for example, when a noise protection barrier interrupts the mowing of a road verge for an extended distance. While driving and working steplessly reduces clutch wear and improves performance in particular, driving with the manual transmission saves fuel due to optimized efficiency levels. Performance The hydrostatic components are engaged by a dog clutch with the vehicle at a standstill but can be disengaged while driving. The electronic pressure control system allows auto- motive-style coasting as well as gearshifting without opening the friction clutch while driving. The major assemblies used have a power of approx. 60 kW.
In full hydrostatic mode, the gear ranges 1-6 are available. The ABS function is available without limitation in hydrosta- tic mode. This system operates optimally when working at speeds below 10 km/h. When driving on an uphill section, the major assembly is automatically regulated to provide the maximum power. Particularly during start-off, the skid torque is increased by roughly 20% by increasing the maximum wor- king pressure and through electronic pressure control. This means that it is generally no longer necessary to additionally engage the working gear group.
Main functions • The system allows fully hydrostatic driving at up to 50 km/h and, in combination with EAS, also allows mixed hydrostatic/transmission-powered driving. • The system can be operated with the usual driving con- trols (accelerator pedal, brake, multifunction control le- vers, steering wheel cruise control buttons). • The system is supported by an additional left multifunc- tion control lever (code DG1) for the gearshifting, cruise control and travel direction functions. • The vehicle can also be accelerated and decelerated via the hydraulic joystick in "driving joystick active" mode.
• Using proportional valves and pressure sensors, a control unit regulates the hydrostatically coupled variable dis- placement pump and variable displacement motor which can be engaged ahead of the main transmission by me- ans of dog clutches. • The actuation system allows both gearshifting and swit- ching to transmission mode while driving as well as ABS-assisted emergency braking. Changing back is only possible at a standstill. 33 Introduction of the New Unimog Generation | Model Series 405 – This printout will not be recorded by the update service. Status: 03 / 2013 –