mercedes-benz Unimog Model Series 405 — UGE_Euro6_en.pdf

Maintenance Maintenance Maintenance of power take-off transmission, power hydraulics, hydrostatic drive For these additional drive systems, the operating hours are recorded in "real time" i.e. independently of the engine ope- rating time. These real times can be read out from the instru- ment cluster. This means that only the time during which the additional drive systems are engaged is recorded i.e. the time during which they are used for work. Minimum maintenance Minimum maintenance servicing is only required if operating hour-dependent maintenance is not carried out.

• Annual maintenance operations • Maintenance operations every 2 years • Maintenance operations every 3 years • Maintenance operations every 5 years • Maintenance operations every 6 years • J1 = Work relevant to safety once a year, subject to sepa- rate repair order The result of this is that, depending on the usage of the Uni- mog, an additional workshop visit may be necessary for main- tenance operations on the additional drive systems. However, the main advantage is a significant extension of the oil change interval which also means a significant reduction in costs for the customer.

On vehicles with power hydraulics and hydrostatic fan drive (shared oil system), an oil change must be performed when one of the systems has reached the corresponding operating time (operating hours). b b Note: A separate maintenance sheet (AP00.20-G-1030UG) for the power take-off transmission, power hydraulics and hydrostatic drive will be published in WIS about this new feature. 84 Introduction of the New Unimog Generation | Model Series 405 – This printout will not be recorded by the update service. Status: 03 / 2013 –