International Trucks VT 275 — VT275 manual

AIR MANAGEMENT SYSTEM EGR Valve • The EGR valve consists of a stepper motor and two poppet valves connected by a common shaft. When inserted into the manifold, the valve aligns with the port in the intake manifold that connects to the EGR cooler. When the valve is open, exhaust gases flow from the cooler and enter the manifold through the open poppet valves. STEPPER MOTOR HOUSING STEPPER MOTOR HOUSING COMMON SHAFT COMMON SHAFT The EGR valve opens when the ECM commands the EGR drive module to position the valve. The drive module then sends signals to the stepper motor to produce armature rotation. When the armature turns, the poppet valves move off their seats.

POPPET POPPET VALVES VALVES EGR EGR VALVE VALVE EGR Flow The ECM-controlled Exhaust Gas Recirculation (EGR) valve meters cooled exhaust gases in the intake charge air to reduce Oxides of Nitrogen (NOx) emissions. Exhaust gases from the exhaust pipe assembly are directed to the EGR cooler. Gases flowing through exhaust passages in the cooler lose heat energy to engine coolant flowing through the coolant passages in the cooler. The cooled exhaust gases travel from the cooler into a passage cast into the intake manifold. The EGR valve fits into the exhaust passage and is sealed with two O-rings.

INTAKE MANIFOLD INTAKE MANIFOLD EGR EGR COOLER COOLER When the EGR valve opens, exhaust gases flow into the intake charge air from both the top and bottom of the passage, providing better distribution of the gases. 47 International ® VT 275 V6 Engine