® FUEL SUPPLY SYSTEM Chassis-mounted electric fuel pump Water-in-fuel detection Electric fuel heater Chassis-mounted primary fuel filter Engine-mounted secondary fuel filter element System Features • The VT 275 uses a chassis-mounted electric fuel pump. The pump is mounted with the fuel heater and primary filter in the Horizontal Fuel Conditioning Module (HFCM). The fuel pump relay, which is located in the Power Distribution Center (PDC), is controlled and monitored by the ECM. SECONDARY FUEL FILTER SECONDARY FUEL FILTER HOUSING HOUSING FILTER INLET FILTER INLET Water separated from the fuel in the HFCM is detected by the Water-in-Fuel (WIF) sensor.
The sensor is an input to the ECM, which controls the WIF dash lamp through the CAN 1 link. BANJO BOLT BANJO BOLT The HFCM has both an electric fuel heater and a temperature controlled recirculation valve. The valve regulates recirculation through the system to assist the heater in warming the fuel. The secondary filter and fuel pressure regulator valve are mounted on the engine. 48 International ® VT 275 V6 Engine