® INJECTOR OPERATION Electro-hydraulic Two control coils Spool valve controlled inlet 48 volt operation short coil on-time self extracting clamps Fuel Injector Features • The VT 275 fuel system uses electro-hydraulic injectors. The injectors utilize lube oil pressurized by the high-pressure pump to provide the mechanical force needed to inject fuel into the cylinders. Each injector has two coils. The IDM selectively signals the coils with 48 volts to control the position of the spool valve that directs oil flow into and out of each injector. After being positioned, the spool is held in position with residual magnetism. The coils draw 20 amps.
No special tools are required to remove the injector from their bores. The injectors are self- extracted from their bore when the hold down clamp is removed. 56 International ® VT 275 V6 Engine