INJECTOR OPERATION Fill • During the fill stage, the spool valve is in the closed position. High pressure oil from the oil rail cannot pass through the spool valve. Low pressure fuel passes through the fuel inlet check valve and fills the plunger cavity. The needle control spring holds the needle on its seat so that fuel cannot enter the combustion chamber. Oil Pressure High Pressure Oil Atmosphereic Pressure Fuel Pressure Fuel Supply Pressure Above 3100 PSI Injection The injector drive module energizes the open coil, and the spool valve moves to the open position. The Injector Drive Module turns off the current to the coil, but the spool remains in the open position.
High pressure oil flows to the intensifier piston. Fuel pressure builds when the plunger moves downward. The fuel inlet check ball seats due to an increase in fuel pressure under the plunger. When fuel pressure rises above the valve opening pressure, the nozzle needle lifts off its seat and injection begins. Oil Pressure High Pressure Oil Atmosphereic Pressure Fuel Pressure Fuel Supply Pressure Above 3100 PSI 58 International ® VT 275 V6 Engine