UNIQUE REPAIR PROCEDURES Replacing Turbocharger Crossover Seal • Place the holding fixture of the crossover tube seal installing tool into a vise. Clamp the crossover pipe into the fixture. Screw the threads of the removal tool into the seal. CROSSOVER TUBE CROSSOVER TUBE HOLDING FIXTURE HOLDING FIXTURE Removing Seal • Install a side hammer into the seal remover tool and pull the seal out. SEAL PULLER SEAL PULLER Installing Seal • Drive a new seal into the crossover tube using the seal driver and a hammer. Install a new O-ring on the other end of the crossover tube. Assemble the crossover tube to the turbocharger so the clamp bolt will be vertical with the turbocharger on the engine.
A small amount of soap and water solution maybe needed to get the seal over the turbine inlet. SEAL INSTALLER SEAL INSTALLER 76 International ® VT 275 V6 Engine