UNIQUE REPAIR PROCEDURES Cylinder Head Removal: Rocker Carrier • The rocker arm carrier is held in place with six small bolts and eight cylinder head bolts. Four additional small bolts at the top hold the cylinder head to the crankcase. Note: When any of the eight large cylinder head bolts are removed the head gasket and the cylinder head bolts must be replaced. HEAD BOLTS (8) 8MM BOLTS (6) Cylinder Head Removal Continued • The rocker arms, push rods and valve bridges must be installed in their original position during reassembly. VALVE BRIDGE (INTAKE) VALVE BRIDGE (INTAKE) The valve bridges can be marked with a permanent marker during disassembly. Note:
If the rocker arms and/or valve bridges are not correctly installed premature valve train wear may result. VALVE VALVE BRIDGE BRIDGE (EXHAUST) (EXHAUST) 80 International ® VT 275 V6 Engine