Cummins — 3666003

C Series Bearings, Connecting Rod Section 1 - Cylinder Block - Group 01 Page 1-9 Clean and Inspect for Reuse When using solvents, acids, or alkaline materials for cleaning, follow the manufacturer's recommendations for use. Wear goggles and protective clothing to reduce the possibility of personal injury. WARNING WARNING Some solvents are flammable and toxic. Read the manufacturer's instructions before using. WARNING Wear appropriate eye and face protection when using compressed air. Flying debris and dirt can cause personal injury. Use solvent and a soft bristle brush or a steam cleaner to clean the cap, capscrews, and bearings.

Dry the connecting rod cap, bearings, and capscrews with compressed air. Inspect the connecting rod caps, connecting rod bearing saddles, and capscrews for nicks, cracks, burrs, scratches, or fretting. Inspect the bearings for damage. Refer to the Parts Reuse Guidelines, Bulletin 3810303, for information on bearing inspection. Replace any bearings with lock tang damage or scratches deep enough to be felt with a fingernail. Replace any bearings that show pitting, flaking, or corrosion into the lining. NOTE: If bearings are damaged, they must be replaced as a set.