Cummins — 3666003

C Series Bearings, Main Section 1 - Cylinder Block - Group 01 Page 1-21 Install the lower main bearings into the bearing caps. NOTE: Make sure the tang of the bearing shell is in the slot of the cap. Use clean engine oil to lubricate the bearing shells. NOTE: The main bearing caps are numbered for location. Number 1 starts with the front of the block, and the numbers face the camshaft side of the engine. When correctly installed, the tang (slots) will both be on the same side of the cylinder block. NOTE: The thrust bearing journal does not have locking tangs. Care must be taken to make sure that the number stamped on the main bearing cap is positioned facing the camshaft side of the engine.

Use clean engine oil to lubricate the capscrew threads. Drain the excess oil from the capscrews before installing them.