Cummins — 3666003

Camshaft C Series Page 1-26 Section 1 - Cylinder Block - Group 01 The tappets are mushroom-shaped. The offset position of the tappet against the camshaft lobe causes the tappet to rotate as it lifts the push rod. Diagnosing Malfunctions Loose rocker levers and the need to reset the valve clearance frequently can indicate camshaft lobe or tappet wear. If an inspection of the levers, valve stems, and push rods does not reveal wear, tappet or camshaft lobe wear should be suspected. CAUTION To reduce the possibility of engine damage, any time a new camshaft is installed new tappets and push rods must also be installed. The camshaft lobes can be inspected after removing the oil pan.

Similarly, the faces of the tappets can be inspected after removing the push rods and lifting the tappets. A severely damaged camshaft journal(s) can generate small metal particles that can be found in the oil pan and oil filter. These metal particles will also be indicated as iron in an oil analysis. As the clearance in the journal(s) increases, a small decrease in oil pressure can be detected.