C Series Cylinder Liner Section 1 - Cylinder Block - Group 01 Page 1-79 When using a steam cleaner, wear safety glasses or a face shield, as well as protective clothing. Hot steam can cause serious personal injury. WARNING WARNING When using solvents, acids, or alkaline materials for cleaning, follow the manufacturer's recommendations for use. Wear goggles and protective clothing to reduce the possibility of personal injury. Some solvents are flammable and toxic. Read the manufacturer's instructions before using. WARNING Wear appropriate eye and face protection when using compressed air. Flying debris and dirt can cause personal injury.
WARNING Use solvent or steam to clean the cylinder liners. Dry the cylinder liners with compressed air. Use clean engine oil to lubricate the inside of the liners. Allow the oil to soak in the liner for 5 to 10 minutes. NOTE: Use lint-free paper towels to wipe the oil from the inside of the liners. Continue to lubricate the inside surfaces of the liners and wipe clean until the paper towel shows no gray or black residue. Inspect the liners for cracks on the inside and outside surfaces.